903 9th Floor Philflex Bay Center, Coral Way Drive, Pasay City
The OHAUS Pioneer Series of analytical balances are designed for basic routine weighing in a variety of laboratory, industrial and education applications. With the right combination of performance and features, the OHAUS Pioneer offers uncomplicated performance for all your basic weighing needs.
Pioneer's draftshield is constructed of all glass panels and three sliding doors, which are easy to remove for cleaning or storage.
The up-front level indicator is located right next to the display and allows the user to quickly make sure the balance is level prior to each use.
Pioneer is designed with selectable environmental settings and three filter modes in order to ensure accurate operation in a variety of settings.
Test equipments used by our biomedical technicians are vital for data quality assurance and essential to evaluate the status of our equipments.
BC Biomedical Patient Simulator
Invasive Blood Pressure/ECG/ Respiration/Temp.
Drop down choice screens list all options for parameters Special power up feature allows the user to choose to use default, last or custom settings.Auto sequences for BPM, static-pressure levels & performance.
10 universal patient lead connectors (Extra space between posts for the largest connectors). Mini-din connectors compatible w/standard BP cables, (Optional MiniDin-M to Din-F cable adapter available BC20-40736).
% Battery life display & low battery indicator Powered by 2-9V batteries or optional battery eliminator. Display backlight .
Full remote operation via RS232
Contec SpO2 Simulator
MS100 SpO2 Simulator is a kind of Separated SpO2 simulator, small and light. It can perform a series of tests for the oximeter by simulation means, and gives cognizance of veracity about the oximeter. Because the oximeter manufacturer may use different R-curves, some R-curves used abroad currently have been embedded.
Separated connection between simulator probe and host, operation and test are more convenient.
262K color and 320*240 TFT, adjustable brightness level.
Film key-press, makes the operation more comfortable.
Power with chargeable lithium battery, can display the charge information of battery.
Key volume, can open or close.
Contec NIBP Simulator
MS200 NIBP Simulator is a multi-purpose test instrument for use with oscillometric Non-Invasive Blood Pressure(NIBP) Monitors. The appearance is concision, the operation is simple and convenient, with its internal pump, the Simulator can generate pressures up to 400 mmHg (53.3 kPa). The Simulator provides dynamic blood pressure simulations, static pressure calibration, automated leak testing, and pressure relief valve testing. You can quickly and exact analyze different NIBP Monitors
Provides pressure gauge testing, pressure leak testing, relief valve testing functions.
A build-in pump provides pressure source with leak and pressure relief tests
NIBP simulations for both arm and wrist cuffs.
Provides adult,neonate, eight variations patients conditions,user-defined simulations.
Provides arrhythmias, respiratory artifact simulations.
Built-in air chamber to simulate adult and neonate cuff.
65k colors,4.3" LCD
Datrend Fetal/Maternal Simulator
At just 5.5” x 3.6” x 1.3” and weighing in at only 11.5 ounces, the FMS-3 is a feature-packed Fetal/Maternal simulator in one of the smallest and lightest weight physical packages available. It’s smaller, lighter and more cost effective than any other similarly-featured Fetal/Maternal simulator on today’s market.
The FMS-3 Fetal/Maternal Simulator sets a new standard of performance and value in simulators for fetal monitors. Simply stated, the FMS-3 provides enhanced simulation capabilities, more simulation channels, additional functionality, and full 5-lead Maternal ECG simulation, all at a price that is considerably less than competitive models.
Its unique features include three (3) channels of ultrasound simulation for detection and monitoring of “Triplets”.
Datrend Electical Safety Analyzer
The vPad series of electrical safety testing devices combines an Android tablet (wired or wireless) with a measurement platform to create a revolutionary test system. The measurement platform provides the normal assortment of electrical measurements (voltage, current and resistance) of the commonly used medical Electrical Safety Standards.
With a large 10.1" (1280 x 800) color display, WiFi(802.11 b/g/n) and Bluetooth connectivity, USB, 32 Gb memory and much more, the Android tablet provides unprecedented usability and scalability for a test instrument,
Fluke Infusion Device Analyzer
The IDA 4 Plus maximizes productivity by testing up to four infusion pumps or channels at once, allowing you to move on to other tasks while letting the IDA 4 Plus takes care of testing and documentation.
The IDA 4 Plus tests virtually any brand of infusion pump including Fresenius-Kabi, Alaris® (Carefusion), Hospira, Baxter, Abbott, Sigma and many others. The IDA 4 Plus is compatible with a wide array of infusion pumps including syringe pumps, volumetric pumps and anesthesia pumps. The infusion device tester measures instantaneous flow, average flow, occlusion pressure, and analyzes patient-control analgesia (PCA) units. An optional PCA trigger box provides automated PCA pump control, allowing technicians to set up tests and walk away. An autostart feature simplifies syringe pump testing or other tests that have long startup times
Fluke IR Thermometer
Built-in thermometer for HVAC applications
Microamps to test flame sensors
Low input impedance: helps prevent false readings due to ghost voltage
Large white LED backlight to work in poorly lit areas
Resistance, continuity, frequency, and capacitance
Min/Max/Average with elapsed time to record signal fluctuations
Compact ergonomic design for one-handed operation
CAT III 600 V safety rated
MySign O Oxygen Analyzer
The MySign® O Oxygen Analyzer is a fast, handheld analyzer ideal for monitoring situations in patient care and emergency medicine. The MySign® O Oxygen Analyzeroffers the high precision required for anesthesia and neonatal applications. It is equipped with a 2.8" multi-color TFT LCD display and USB port for quick updates and PC connectivity via included software. The highly durable design and robust construction protect the MySign® O Oxygen Analyzer from shock, water and dust.
•Intuitive operation w/ self-explanatory icons
•Comprehensive data and alarm management
•Spot check and continuous monitoring modes
•Durable & hygenic design
Riken F1-21 Gas Indicator
In the anesthetic application, the function of the F1-21 Riken Gas Indicator is the same as the other models with the advantage of direct digital readout, selectable anesthesia gas, the base gas (air or O2), electric sample pump, and automatic set up for any or all of the previous models of Riken Gas Indicators.
Memory: Stores up to 100 readings with time and
Power: 4 “C” size alkaline cells for operating optical system illumination electronics and sample pump. Average life battery, 80 hours.
Direct readout of % volume measurement of commonly used anesthetics on the LCD display.
Automatic accommodation for selected anesthetic base gas and scale range and no conversion factors or calculation required.
Self-checking readout on display.
Set of Weights
This calibration weight set contains
One 5kg weight
Two 2kg weights
One 1kg weight
One 500g weight
Two 200g weight
One 100g weight
One 50g weight
TSI Cetrifier FA Plus
Certifier® FA Plus Ventilator Test System 4080 is the full-feature system capable of testing virtually all models of ventilators: adult, pediatric, anesthesia, neonatal and high-frequency. It can also test a variety of other medical equipment such as anesthesia gas delivery machines, insufflators, and oxygen concentrators. Its compact size makes this ventilator tester ideal for use in field service, biomedical shops, and manufacturing.
The fast response and bi-directional sensing sensors make it the Certifier FA Plus Ventilator Test Systems 4080 capable of testing all types of ventilators including neo-natal and high frequency. This ventilator tester is designed to measure air, oxygen, and nitrous oxide flow and pressure in institutional, home care, field service, laboratory, and production applications
Universal X-ray Instrument
UXI is capable of measuring x-ray kVp, mA, mAs, Dose, HVL and exposure time. One exposure is needed for kVp, mA, mAs and dose. Three exposures are needed for an accurate HVL measurement. The built in HVL calculator is used to calculate HVL.
Each UXI comes with a 7 inch (178 mm) Android tablet. With the programmable delay, the unit is capable of measuring kVp for exposure times as low as 16 milliseconds. This allows shorter exposure times minimizing xray exposure and wear and tear on the x-ray head.
The kVp measurement circuit and control program have been greatly improved compared to our other instruments. Accurate kVp measurements can be made for a wider range of x-ray intensity with less dependancy on distance from the x-ray head.